Pressure clean
From £150Hot-water pressure wash to remove dirt, algae and surface stains.
Fast turnaround · Removes 80% of dirt · Inc. weed kill
Best for: Annual maintenance, quick refresh, pre-sale clean
Most driveway and patio "cleans" you see locally are just a power-washer and out. We pressure-clean, kill weeds, replace broken blocks, re-sand or re-joint with kiln-dried sand or polymer, and seal with the right product for the surface.
A proper restoration extends the life of a driveway by 5–10 years and brings back the colour and finish of the original install.
Most driveways need somewhere between a clean-and-seal and a full restoration. We assess on site and recommend honestly — a £150 clean is often enough, no need for £1,200 of work.
Hot-water pressure wash to remove dirt, algae and surface stains.
Fast turnaround · Removes 80% of dirt · Inc. weed kill
Best for: Annual maintenance, quick refresh, pre-sale clean
Pressure clean + replace kiln-dried sand in joints — stops weeds and movement.
Stops block movement · Weed-resistant · Restores look
Best for: Block paving 5+ years old, slight movement issues
Pressure clean + replace joints with polymer compound — 10-year weed-free guarantee.
10-year weed-free · Locks blocks together · No sand top-up
Best for: Older driveways, problem joints, low-maintenance fix
Clean, replace damaged blocks, polymer-joint, seal — like-new finish.
Replace broken blocks · Premium sealer · Looks brand new
Best for: Tired driveways, before sale, postpone full replacement
No surprises, no chasing, no upfront deposit. You pay on completion, once you're happy.
We visit, measure, listen to what you want and check the ground. No pressure, no commitment.
A clear written quote within 24 hours — itemised, with materials and timeline. No hidden charges.
Our own team handles excavation, base, edges and finish — usually 3–7 days for a standard job.
Written workmanship guarantee. No money taken until you're happy with the finish.
A fast planning tool — pick service, size and material for a sensible starting figure, then ask us for the written quote.
A pressure clean every 1–2 years keeps a driveway looking sharp. Re-sanding is typically needed every 5–7 years on block paving. A full restoration with polymer jointing extends the life of the drive by another 10 years before any major work is needed.
Yes — we use specialist degreasers and hot-water pressure washing for oil, tyre marks and rust stains. Most stains come out completely; deep-set old oil sometimes leaves a faint shadow but the surface is dramatically improved.
Kiln-dried sand is cheap, easy to top up, but washes out over time and lets weeds through. Polymer jointing locks blocks together, prevents weed growth for 10+ years, and stops block movement. Polymer costs about 50% more but lasts 5× longer.
Yes, slightly. Matt sealers preserve the natural colour. Wet-look sealers darken the blocks and bring out their original colour — looks great when freshly laid. We bring samples to every site visit so you can see the finish before deciding.
Yes — we lift the affected area, re-set the sub-base properly and re-lay. Sinkage usually means the original sub-base failed (cowboy install). We fix it permanently, not patch it.
Tell us what you're planning. We'll come back within 24 hours with the next sensible step — a call, a visit, or a written quote.
Powered by ElevenLabs
